Home page

SZT300/SZT300-Ⅰ/SZT300-Ⅱ Clinker Bulk Machine

1. overview The clinker bulk machine is an equipment that automatically conveys the clinker (<= 50mm) from the warehouse to the clinker bulk vehicle. The cement clinker bulk equipment at the bottom of the warehouse is mainly composed of manual rod valve, electric sector valve, winch device, telescopic discharge device, dust collection hose, capacitive limit switch, electric control system and other parts. 2. technical parameter table technical parameter conveying material cement clinker or similar block material bulk density clinker 1.45t/m3 material temperature <= 80 ℃ material particle size <= 50(mm) loading capacity 200 t/h discharge head expansion distance customized according to user requirements manual rod valve 410x 410mm electric sector valve 700x 700mm pneumatic rod valve 700x 700mm winch 8m/min20KN3KW capacitive limit switch VEGACAP11 probe length 400mm probe diameter ф 20/ф mm working temperature 15mm Pa -40 ℃-200 ℃ installed power 3.75Kw/5.2Kw Note: the cement bulk machine can meet the requirements of user material temperature and material particle size by changing the material. The working principle of 3. cement bulk machine When the transportation tool enters the loading position, open the corresponding number of bars of the bar valve. Press and hold the "lowering button" of the control cabinet, the power supply of the lifting motor will be automatically disconnected after the blanking head is in place, press the "loading button" to enter the unloading state, and the auxiliary equipment will start to work accordingly. The dust generated by unloading will enter the dust collector through the feed hopper and be purified by the telescopic dust collecting hose. When the material in the lower head is full, the blanking head will rise and give an alarm. The rising distance shall be set before unloading distance, then adjust the time of the time relay to T = I/V. During the ascending process, the material is always charged. When the material head is full, repeat the above actions. After reaching the material full position, press the stop button to make the electric vibrator brake in reverse, or close the fan valve to stop the work. After parking, press the up button to let the lower hopper leave the material for a certain distance to ensure that the transportation tool is shifted and then aligned with the second unloading station. Until the entire silo is full. Material type clinker material bulk density Y = 1.25t/m3 material temperature ≤ 90 ℃ material particle size ≤ 150mm loading capacity 220 t/h bulk head expansion distance 4400mm vibration feeder model DZG1103# power 2X1.lKW rated voltage 4.7A rated current 5000N hoist model CD12-18D lifting speed 8 m/min rated lifting weight 20000N rated voltage 380V power 3kw capacitive material level switch model 80 ΦFTC131 maximum pressure 10bar ~ 20VAC static load dynamic load F1 vertical direction 3.72kN ± 0.110kN horizontal direction ± 0.120kNF2 vertical direction 6.36kN ± 0.110kN horizontal direction ± 0.120kNF3 vertical direction 7.2kN ± 2.0kN horizontal direction F4 vertical direction 7.8kN ± 2.0kN horizontal direction F5 vertical direction ± 3.0kN ± 0.75kN horizontal direction

Keywords:

数据1 数据2 数据3 数据4

Heavy machinery | Power station auxiliary equipment | Engineering general contracting | Mining machinery | Environmental protection equipment

Category:

Bulk Loading Equipment

Service hotline:

86-513-88400999

More Products

Consult

SZT300/SZT300-Ⅰ/SZT300-Ⅱ Clinker Bulk Machine

1. Overview

The clinker bulk machine is the equipment that automatically transports the clinker (<= 50mm) from the warehouse to the clinker bulk vehicle. The cement clinker bulk equipment at the bottom of the warehouse is mainly composed of manual rod valve, electric sector valve, winch device, telescopic discharge device, dust collection hose, capacitive limit switch, electric control system and other parts.

2. Technical Parameters

	Technical parameters
Conveying material	Cement clinker or similar lumpy materials
Bulk weight of material	Clinker 1.45t/m3
Material temperature	<= 80 ℃
Material granularity	<=50(mm)
Loading capacity	200t/h
Telescopic distance of discharge head	Customized according to user requirements
Manual stick valve	410x410mm
Electric sector valve	700x700mm
Pneumatic rod valve	700x700mm
winch	8m/min 20KN 3KW
Capacitive Limit Switch	VEGACAP11 probe length 400mm Probe diameter ф 20/ф 15mm Working pressure 6300KPa Working temperature -40 ℃-200 ℃
Installed power	3.75Kw/5.2Kw

Note: The cement bulk machine can meet the requirements of user material temperature and material particle size by changing the material.

3. cement bulk machine working principle

When the transportation tool enters the loading position, open the rod valve for the corresponding number of rods. Press and hold the "lowering button" of the control cabinet, the power supply of the lifting motor will be automatically disconnected after the blanking head is in place, press the "loading button" to enter the unloading state, and the auxiliary equipment will start to work accordingly. The dust generated by unloading will enter the dust collector through the feed hopper and be purified by the telescopic dust collecting hose. When the material in the lower head is full, the blanking head will rise and give an alarm. The rising distance shall be set before unloading distance, then adjust the time of the time relay to T = I/V. During the ascending process, the material is always charged. When the material head is full, repeat the above actions. After reaching the material full position, press the stop button to make the electric vibrator brake in reverse, or close the fan valve to stop the work. After parking, press the up button to let the lower hopper leave the material for a certain distance to ensure that the transportation tool is shifted and then aligned with the second unloading station. Until the entire silo is full.

Material Type		clinker		Bulk weight of material			Y=1.25t/m3
Material temperature		≤ 90 ℃		Material granularity			≤ 150mm
Loading capacity		220t／h		Bulk head telescopic distance			4400mm
Vibrating feeder	Model				DZG1103#
	Power				2X1.lKW
	Rated voltage				4．7A
	Rated current				5000N
winch	Model				CD12-18D
	Lifting speed				8m／min
	Rated lifting weight				20000N
	Rated voltage				380V
	Power				3kw
Capacitive level switch		Model	FTC131			Maximum pressure		10bar
		Voltage	20VAC
		Probe Specifications		Φ25 X400	Temperature		-20~80 ℃

		static load	dynamic load
F1	Vertical direction	3.72KN	±0.110kN
F1	Horizontal direction		±0.120kN
F2	Vertical direction	6.36KN	±0.110kN
F2	Horizontal direction		±0.120kN
F3	Vertical direction	7.2KN	±2.0kN
F3	Horizontal direction
F4	Vertical direction	7.8KN	±2.0kN
F4	Horizontal direction
F5	Vertical direction	±3.0KN	±0.75kN
F5	Horizontal direction

More Products

Cantilever bucket wheel stacker reclaimer

Cantilever stacker

Circular stacker-reclaimer.doc

Semi-portal scraper reclaimer

Portal reclaimer

Intelligent mobile plate & belt conveyor for composite bulk materials

Product Consultation

Website

Service hotline

86-513-88400999

Business Department:

Zhou Baohua 86-13906278080
Technical support:

Ding Baoqin 86-13906276368
Fax: 86-513-88400998
E_ mail： jszk@vip.163.com
Address: No. 29 Xingdian West Road, Baidian Town, Hai'an City, Jiangsu Province