Heavy duty plate conveyor
Keywords:
Heavy machinery | Power station auxiliary equipment | Engineering general contracting | Mining machinery | Environmental protection equipment
Category:
Service hotline:
Heavy duty plate conveyor
Product introduction
BZ type heavy-duty plate feeder is a kind of auxiliary equipment for transportation machinery. It is used in the crushing and grading workshops of large mineral processing plants, as well as in departments such as cement and building materials, as a silo for continuous and uniform feeding of materials to the primary crusher. It can also be used for short distance transportation of materials with larger particle size and specific gravity. It can be installed horizontally or obliquely, with an inclination angle of 12 degrees.
Product Features
The drive chain adopts standard dry track chains produced by professional manufacturers, which do not require lubrication and are easy to install and maintain.。
All key connection parts are connected with expansion sleeves and locking discs, which do not damage the shaft diameter, reduce stress concentration, and facilitate disassembly and assembly.
th overlapping grooves that do not leak during operation. The groove plate is reinforced up and down, providing greater load-bearing capacity.
The driving device adopts a suspension single point floating support method, and the meshing of the teeth is not affected by the basic accuracy, which can greatly reduce the radial installation size of the plate feeder.
Model, basic parameters and dimensions
Heavy plate feeder is divided according to transmission mode
a) Right transmission: The transmission device is on the right side of the material running direction
b) Left transmission: The transmission device is on the left side of the material running direction
Divided according to the change in feeding speed
a) Constant speed type
b) Speed control type
Technical specifications and dimensional parameters
|
Model |
Slot width (mm ) |
(mm ) Center distance between head and tail wheel axles |
Speed (m/s) |
Particle size (mm ) |
Processing capacity (t/h) |
Power (kw) |
(mm) Overall dimensions |
Notes |
|
BZ160-9 |
1600 |
9000 |
0.01-0.07 |
≤1000 |
27-270 |
30 |
11250x4153x2890 |
|
|
BZ180-8 |
1800 |
8000 |
0.01-0.07 |
≤1000 |
≤500 |
37 |
10250x4153x2890 |
|
|
BZ180-8.75 |
1800 |
8750 |
0.01-0.07 |
≤1000 |
≤500 |
37 |
11050x4553x2890 |
|
|
BZ180-9 |
1800 |
9000 |
0.01-0.07 |
≤1000 |
≤500 |
37 |
11250x4553x2890 |
|
|
BZ180-9.8 |
1800 |
9800 |
0.01-0.07 |
≤1000 |
≤500 |
37 |
12000x4553x2890 |
|
|
BZ180-10 |
1800 |
10000 |
0.01-0.07 |
≤1000 |
≤500 |
37 |
12200x4553x2890 |
|
|
BZ200-9.8 |
2000 |
9800 |
0.01-0.07 |
≤1000 |
≤500 |
37 |
12000x4553x2890 |
|
|
BZ220-10 |
2200 |
10000 |
0.01-0.07 |
≤1200 |
≤700 |
45 |
12000x4753x2890 |
|
|
BZ230-10 |
2300 |
10000 |
0.01-0.07 |
≤1500 |
≤800 |
45 |
12000x4853x2890 |
|
|
BZ240-10 |
2400 |
10000 |
0.02-0.06 |
≤1600 |
≤850 |
2x37 |
12000x4953x2890 |
|
|
BZ250-11.5 |
2500 |
11500 |
0.01-0.07 |
≤1800 |
550-900 |
2x45 |
12000x5053x2890 |
|
注：
Notes:
The center distance is the distance between the centerline of the drive sprocket and the centerline of the tension sprocket shaft.
The width of the chain plate is the inner width of the bottom of the chain plate.
Precautions
The allowable deviation of sprocket center distance is within one chain pitch.
The feeding speed of the feeder shall be selected according to the following series, and the deviation shall not exceed ± 10%.
|
Speed code |
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
T |
|
Speed m/s |
0.02 |
0.025 |
0.03 |
0.04 |
0.05 |
0.06 |
0.08 |
0.10 |
0.12 |
0.16 |
0.20 |
0.02-0.2或0.05-0.16 0.02-0.2 or 0.05-0.16 |
|
Note: T is the speed code for variable speed, while 0.05-0.16 applies to BZ3150 |
||||||||||||
型号标记
Model markings
Example of marking: The width B of the conveying groove is 2000mm, and the center distance L of the sprocket is 6.3m.
The dual transmission heavy-duty plate feeder is marked as: Plate feeder BZ2000-6.3-I JB/T4040-1999.
More Products
Product Consultation
Website
Service hotline
Business Department:
Zhou Baohua 86-13906278080
Technical support:
Ding Baoqin 86-13906276368
Fax: 86-513-88400998
E_ mail： jszk@vip.163.com
Address: No. 29 Xingdian West Road, Baidian Town, Hai'an City, Jiangsu Province